Description
Description : PLASTUB, a specialist in thermoplastic extruded tubing, offers its range of PLASTUB® PU98. Extruded and calibrated polyurethane tube based on 98 Shore A polyester, with good resistance to abrasion, UV and hydrocarbons, it is widely used for the transfer of compressed air, gas, , under pressure. Its translucent appearance and low radius of curvature is an excellent alternative to polyamide and other polyethylene. Also available in crystal (PLASTUB® PU95), flame retardant (PLASTUB® PUI) or welded (PLASTUB® PU98 welded), it can be adapted to your most precise needs: many colors, markings, cut in lenghtss, sleevinged versions...
Options (consult us) : • Other diameters
• Other solid colours
• Cut to lengths
• Other packaging
• sleevinged versions
• Other solid colours
• Cut to lengths
• Other packaging
• sleevinged versions
Variant : PLASTUB ® PU98 bonded
2 tubes PU 98 Shore A
Blue and black bonded
PLASTUB ® PU95
PU tube 95 Shore A / 60°C
Crystal (polyether base)
PLASTUB ® PU94
PU tube 94 Shore A / 60°C
Translucent (polyester base)
PLASTUB ® PUI
PU tube 87 Shore A / 60°C
Opaque fire-retardant (polyether base)
2 tubes PU 98 Shore A
Blue and black bonded
PLASTUB ® PU95
PU tube 95 Shore A / 60°C
Crystal (polyether base)
PLASTUB ® PU94
PU tube 94 Shore A / 60°C
Translucent (polyester base)
PLASTUB ® PUI
PU tube 87 Shore A / 60°C
Opaque fire-retardant (polyether base)
Characteristics
General characteristics : • Good resistance to abrasion
• Calibrated tube
• Small bending radius
• Good UV resistance
• Good hydrocarbon resistance
• Calibrated tube
• Small bending radius
• Good UV resistance
• Good hydrocarbon resistance
Temperature of use : -30°C to +60°C
Nominal hardness : 98 Shore A as per DIN 53505
Nominal density : 1.22 as per DIN 53479
Tensile strength : >50 Mpa as per DIN 53504 S2
Elongation at break : >550 % as per DIN 53504
Standard colour : Translucent
Peak temperature : +80°C
Recommended connection : Quick-fit connector
Range width : 2.5 x 4 mm to 8 x 12 mm